ON THIS WIKI
Alveary Hygroregulator
| Alveary Hygroregulator | |
|---|---|
| |
|
| |
| Name | Alveary Hygroregulator |
| Source Mod | Forestry |
| ID Name | Forestry:alveary:5
|
| Type | Block |
| Stackable | Yes (64) |
| Blast Resistance | 7.5 |
| Hardness | 1.0 |
| Solid | Yes |
| Transparent | No |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | Any tool |
The Alveary Hygroregulator can be added to a standard Alveary multi-block construction to influence the humidity and (to a lesser degree) temperature of the hive. Like all modifier blocks, it must be in the bottom two layers of the Alveary to function.
Usage[edit]
The Hygroregulator accepts Water or Lava to increase or reduce Humidity respectively. Only one type of fluid can be in the Hygroregulator's tank at any time. Each Hygroregulator block will affect Humidity by 20% and Temperature by 10%. One bucket will last approximately 50 seconds. The internal storage has space for ten buckets and a stack of cans/capsules. Cans or capsules are consumed, buckets will be only emptied. Multiple Hygroregulators can be used together to make bigger changes.
| Liquid | Temperature Change | Humidity Change |
|---|---|---|
| Lava | +10% | -20% |
| Water | -10% | +20% |
Recipe[edit]
Any other Alveary block (Mutator, Swarmer, etc.) may be substituted for the standard one in the crafting Recipe.
See Also[edit]
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Discussion
