ON THIS WIKI
Fluid Conduit
| Fluid Conduit | |
|---|---|
| |
|
| |
| Name | Fluid Conduit |
| Source Mod | EnderIO |
| ID Name | Unknown |
| Type | Block |
| Stackable | Yes (64) |
| Solid | Yes |
| Transparent | No |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | 
|
Fluid Conduit is a block used to transport liquids. The maximum transfer rate depends on a liquid itself but the basic Fluid Conduit typically can extract 50 mb/t from a tank and can carry 200 mb/t through a single conduit. Fluid conduits are also affected by gravity whereas the Pressurized Fluid Conduit and Ender Fluid Conduit are not.
As of the 1.7.1 EnderIO update, Degradation was added. If a fluid sits in the conduit without moving for an estimated 24 to 32 hours they begin to have a leaking-type particle effect, this affects the transfer rate of the pipe, losing about 1/4 of the liquid being transported. The only known way to fix this is by right-clicking with a wrench and re-placing the conduit.
Any BuildCraft-compatible wrench can be used to configure and connect Fluid Conduits but the Yeta Wrench has special features specific to conduits and is more useful.
Recipe
Feed The Beast Infinity Evolved Expert Mode
See Also
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Discussion
.png){kind=link}
