ON THIS WIKI
Plate Bending Machine
| Plate Bending Machine | |
|---|---|
| |
|
| |
| Name | Plate Bending Machine |
| Source Mod | GregTech 4 |
| ID Name | gregtech_addon:4059:59
|
| Type | Block |
| Stackable | Yes (64) |
| Blast Resistance | 30.0 |
| Hardness | 10.0 |
| Solid | Yes |
| Transparent | Yes |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Drops |  Machine Parts (1)
|
| Required Tool | 
|
Plate Bending Machine is a block added by the GregTech 4 mod. It can be used to create Plates more efficiently than by hand.
The Plate Bending Machine has two inputs and two outputs. The default output side is back, but it can be turned with Wrench.
The Plate Bending Machine has three buttons in interface. The left one (with a blue lightning) allows transporting energy to the machine on the output side. The middle one (with an orange block with a black arrow) allows auto-outputting items to the inventory on output side. The right one (with a rectangle) does nothing as of GregTech 4.08.08.
Note that this machine only can handle 32 EU/p energy so without the help of Transformer Upgrades and HV-Transformer Upgrades the machine will explode if given higher voltage. Also it cannot receive energy from front side.
Recipe
Piston can be substituted with 
Sticky Piston.
Electronic Circuit can be substituted with 
Integrated Circuit (GregTech 4).
Note: 
Automatic Compressor can be substituted with 
Compressor (IndustrialCraft 2). On the other hand, the IndustrialCraft2 compressor itself isn't craftable.
Usage
Plate Bending Machine has no known uses in crafting.
| ||||||||||||||||||||||||||||||||||||||||||
Discussion
.png){kind=link}